Find OPTIMUM Automatic Timed Condensate Drain Valve, AC220V 1/2'' Brass Electronic Drain Valve, JORC Type Electronic Timed Drain Valve on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Electronic Pressure Switch > Optimum Jorc Type Electronic Timer Drain Solenoid Valve

Optimum Jorc Type Electronic Timer Drain Solenoid Valve

Optimum Jorc Type Electronic Timer Drain Solenoid Valve

    Payment Type: L/C,T/T,Paypal,Money Gram,Western Union
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 1 Piece/Pieces
    Delivery Time: 4-8 Days
    Packaging: Boxes, Carton, Pallet
    Productivity: 300000 pcs per month
    Brand: Brando
    Transportation: Ocean,Land,Air
    Place of Origin: China Ningbo
    Supply Ability: 70000 pcs per week
    Certificate: CE
    Port: Ningbo,Shanghai,Yiwu

Basic Info

Model No.: BADV01

Product Description

Optimum Jorc Type Electronic Timer Drain Solenoid Valve


Optimum Jorc Type Electronic Timer Drain Solenoid Valve for controlling condensation water discharge is suitable for all kinds of compressed air applications, including compressors, receivers, filters and chilled air dryers. The drain provides reliable compact condensate removal with easily adjustable electronic timer, direct-acting solenoid valve, large hole and brass or stainless steel body options. OPTIMUM type electronic drain valve is easy to install and easy to adjust, with rated pressure up to 230 PSI. It includes a test switch, LED on/off indication and a maintainable valve. Most importantly, the large diameter of 4.5 mm means it is well suited for difficult applications with high condensate flow and solid particulate contaminants.


Maintenance instructions:
1. Before use, check whether the components are damaged during transportation and then install and use them.
2. When installing, please pay attention to the direction of gas flow and the correct connection.
3. Pay special attention to whether the voltage meets the requirements during installation. It is recommended to debug with the manual device before commissioning the machine, and then commission the power.
4. Please pay attention to dustproof, use clean air (must install air filter before airway), it is recommended to install silencer throttle valve at exhaust port.
5. When connecting the pipeline, be careful not to exceed the end face of the tooth, and pay attention to eliminate the metal joints, dust and oil in the pipe joints and pipes.


Technical parameter of Optimum Jorc Type Electronic Timer Drain Solenoid Valves:

Ref number OPTIMUM / OPTIMUM-HP-S
Type Jorc Split Type
Medium temperature: 34 - 131 °F
Ambient temperature: 34 - 131 °F
Valve type: 2/2 way, Direct Acting
Orifice size: 4.5 mm
Seal material: FPM
Port size: 1/4" (F) & 1/2" (M) NPT / 1/2" NPT
Inlet connection height: 0.4"
Valve body material: Brass / Stainless steel
Power connection: DIN 43650A

Detail display of OPTIMUM Automatic Timed Condensate Drain Valves:

Detail display of OPTIMUM Automatic Timed Condensate Drain ValvesDetail display of OPTIMUM Automatic Timed Condensate Drain Valves
Detail display of OPTIMUM Automatic Timed Condensate Drain ValvesDetail display of OPTIMUM Automatic Timed Condensate Drain Valves


Installation of AC220V 1/2'' Brass Electronic Timer Drain Valves:

Installation of AC220V 1/2'' Brass Electronic Timer Drain Valves


OPTIMUM or COMBO type electronic timer controlled drain valves:

OPTIMUM or COMBO type electronic timer controlled drain valves


Maintenance instructions of Optimum Jorc Type Electronic Timer Drain Solenoid Valves:
Before using this product, make sure it meets your requirements and fits your application!

1. Open the package and visually check whether there is any transportation damage after leaving the factory.


2. Close the condensate supply, that is, close the ball valve.


3. Press the test button on the timer to empty any remaining condensate and reduce the pressure valve.Turn off the power. make sure the power is off before continuing!


5. Open valve top nut with 14 mm wrench.Remove connector, coil and timer assembly from valve shaft.


7. Open valve shaft with 23 mm wrench. - do not use valve shaft as lever!


8. Replace valve parts with parts provided in service kits.


9. Reassemble internals and shafts. Turn shaft assembly back onto valve body with 23 mm wrench (Max. Torque 10 nm).


10. Reposition coil, connector and timer assembly to valve, place washer and top nut and tighten front nut (Max. Torque 1 Nm) using a 14 mm wrench.


11. Turn on the power.


12. Slowly open the ball valve and restore the normal system pressure.


13. Press the test button to check valve function.


Welcome to your any question and inquiry!

NINGBO BRANDO HARDWARE CO.,LTD

 


BRANDO is one of leading manufacturers of solenoids, armature assembly, and solenoid valve in China, located in China main sea port city -- NINGBO, the location with high convenience of shipment not only by air but also by ocean.

4


BRANDO has 4800 square meter workshops and around 50 employees, developed about 10 years from year 2008 by focusing on products quality, design, service, now with good reputation from all over the world and our annual output value increasing yearly by yearly, moreover, more than 90% of annual output value is from exporting brought from our high quality and best customer service. We highly believe to run the company and brand well should keep faith of BEST QUALITY, BEST ATTITUDE, and BEST CUSTOMER SERVICE.

1


BRANDO`s products range covering solenoid coil, solenoid valve armature assembly, various solenoid valves, fluid medium such like pneumatic, hydraulic, water, hot water, air, steam, gas, oil, chemical liquid and others. We supply OEM and ODM, all products widely applications for automotive, automation, textile industry, pneumatic , hydraulic, air and water treatment systems and so on.
Model series have such like Q22HD, 2W, 2S, US, 2L, 223, 6014, 0311, 0927, 0955, PU220, PU225, 2P, 2V, VX2120, QX, VX22, VX31/32/33, ZQDF, SCG, CA, DMF, 4V100, 4V200, 4V300, 4V400, VF, VZ, EVR, etc... Any request just feel free to contact our sales team, will response once get message, email or calling.
BRANDO company is approved by ISO9001:2008 system and managed by 5S management, with clean workshop environment and high precision machines and strict operation paperwork procedure to ensure the production well, save delivery time, and reduce any waste to satisfy all clients all over the world.
6


BRANDO company welcome clients from all over the world, we attend exhibition in many countries, such like America, Europe, Australia, Malaysia, Pakistan, Egypt, New Zealand, Poland, Germany, Korea, India, Indonesia, etc. We highly welcome your visit at our booth or our company.

2


Quick review of BRANDO products:

valve

valves2

pulse valve

armature and coils



Company Info

  • Company Name: NINGBO BRANDO HARDWARE CO.,LTD
  • Representative: Lu Jin Jun
  • Product/Service: Solenoid Valve Armatures , Solenoid Valve Coils , Pneumatic Solenoid Valves , Pneumatic Cylinders , Pulse Jet Diaphragm Valves , Pneumatic Components
  • Capital (Million US $): 1000,000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
  • Export Percentage: 81% - 90%
  • Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 3,000-5,000 square meters
  • Factory Location: Ningbo
  • Contact Person: Mr. Brandon Bao
  • Tel: 86-0574-83879820
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters